FUELINE-X is designed for the fireside cleaning of deposits in the combustion equipments. Sooting, clinker & other combustion deposits are common fireside occurrences in boiler and thermic fluid heater installations. Such deposits have to be cleaned manually by brushing. But unfortunately the cleaning is almost never perfect and cannot reach certain sections of the heating surface that have poor accessibility. The stickiness of the unburnt carbon results in build up of incombustibles solids on the heat transfer area. The carbon acts as the thermal barrier reducing heat transfer & efficiency of the boiler. The effect of the reduced heat transfer is usually reflected in loss of efficiency as higher stack temp. is observed. |
PRODUCT FEATURES |
FUELINE-X is a formulation which contains dispersants, chemicals & corrosion inhibitors. it is a free flowing powder ,non toxic and safe to handle it is to be dosed directly into the furnace while the combustion equipment is in operation. |
|
FUELINE-X when enters a high temperature zone it vaporizes and forms a thin film on the comparatively cooler surface of the furnace the combustion catalyst reduces ignitation temp. of the adhering carbon permitting to burn at reduced temperatures. Oxidizing agents provide the combustion oxygen. |
The action of FUELINE-X exposes the bare metal of the heat exchanger. The corrosion inhibitors protect the metal from corrosion by acids produced during cumbustion & prevent scale formation due to metal oxidation. |
FUELINE–X keeps the equipment at the peak efficiency while traditional cleaning methods cause a sharp decrease in efficiency & increase in stack temperature between shut-downs. |
Regular use of FUELINE-X ensures complete removal of fireside deposits and keeps the combustion system clean & healthy for trouble free operation. |
DOSAGE & APPLICATION |
FUELINE-X can be dosed into the furnace,economizer,superheater packed in a container itself or blown with the help of air pressure gun. The minimum temperature required for application is 350 – 400 deg. cent. It is not possible to recommond a perfect dose as it depends on various operational conditions such as load , fuel consumption etc. Numatik Engineers Pvt Ltd will assist you in designing & establishing a perfect dose to meet your specific needs and operating conditions. |
HANDLING & STORAGE |
FUELINE-X is an alkaline compounds may cause irritation with skin. Avoid contact with eyes and nose. In case of contact wash with plenty of fresh water. Do not swollow. Keep container dry, closed & away from direct heat. |
FUELINE-X is available in standard pack containing 10 units packs of 1.0 kgs. each. |